
Pick your bike to check the fit








Skid plate KTM EXC, Husqvarna TE 150 TBI 2024-2027
KTM, Husqvarna EXC/TE 150 · 2024–2027
- Material
- AlMg3 aluminium (PA11), 4 mm
- Weight with mounts
- 1.08 kg
- In the kit
- mounting bolts, washers
- Protects
- engine cases, covers, water pump, starter motor, frame rails
- Fitting
- no drilling and no changes to the bike, drain the oil without removing the plate
93 €
Ships in 1 working dayOrders by 11:00 (Polish time) ship the same working day
Delivery from 14 € · 14-day returns
Przelewy24 · PayPal · Visa · Mastercard · Revolut Pay
Made in Poland4 mm AlMg3 aluminium (EN AW-5754, PA11) skid plate (bash plate) for 150 two-strokes with TBI injection: KTM EXC 150 and Husqvarna TE 150, model years 2024–2027. It covers the engine cases, engine covers, water pump and the frame rails up to the footpeg mounts, and the stiff sheet keeps its shape after an impact. The bolts and washers for fitting to the frame are in the kit. It works with clutch and ignition cover guards and with the PG16 pipe guard.
- KTM 150 EXC TBI: 2024, 2025, 2026, 2027
- Husqvarna TE 150 TBI: 2024, 2025, 2026, 2027
The standard KTM EXC leaves the factory without a skid plate from model year 2024. In 2024 these two-strokes got a new frame and TBI injection in place of TPI, so plates for older model years do not fit. This plate does not fit the 150 TPI from 2020–2023. For 250/300 TBI two-strokes from 2024–2027 there are the SP04 (aluminium) and the SP08 (8 mm HDPE).
The plate covers the engine cases, starter motor, clutch and ignition covers, water pump and the lower frame rails up to the footpeg mounts from underneath. Without a guard, those parts take the hits on rocks, roots and logs, plus the stones thrown up by your front wheel and by riders ahead of you. A cracked case or cover means an oil leak, which usually ends the ride, and replacing a case means splitting the engine.
A stiff sheet spreads the impact force across the whole plate and its mounting points on the frame, so a rock does not hit the case at a single point.
PA11 is the Polish designation for the alloy AlMg3 (EN AW-5754), aluminium with about 3% magnesium. It resists corrosion even in salt water, which is why boats are built from it. We bend the plate on a press brake and TIG-weld it on both sides. After welding we clean and polish it.
Aluminium copes better with sharp rock edges than plastic, and a 4 mm sheet is thinner than an HDPE plate, so it leaves more ground clearance.
The kit includes the mounting bolts and washers. You bolt the plate to four factory points on the frame with no drilling and no changes to the bike, so an impact goes into the frame and not through the bolts into the cases. You can drain the oil without removing the plate, and the bike still sits on a stand. The SP09 works with clutch and ignition cover guards and with the PG16 pipe guard.
We design every plate from a 3D scan of the specific bike and cut it on CNC machines in Katowice, Poland. Professional riders test every new model before it goes on sale.
Technical data
Manufacturer information
Complete the protection for KTM EXC/TE 150
Fan kits85 €
Brake disc guardsRear disc
55 €
Brake disc guardsFront disc
86 €
Radiator guardsWithout fan
103 €