Radiator guards Beta RR 2024-2026 – full front

• Beta RR 2T: 2024, 2025, 2026
• Beta RR 4T: 2024, 2025, 2026

RG19 does not fit with a fan installed and does not fit the 2023 models; for the Beta RR 2020–2023 choose the RG12 or RG13. For the same bikes there is also the RG20, the lighter version weighing 0.75 kg, on which the steering stops must be adjusted. The guards together with a SPAL fan are the RG19 Fan Set 2T and RG19 Fan Set 4T. You can buy the fan on its own as a separate kit in the “Fan kits” category.

A radiator on an enduro bike is a thin aluminium core with fins. In a fall onto its side the core bends or twists, the channels crack and coolant leaks out. Without coolant the engine overheats quickly, so a punctured radiator usually means a tow back. RG19 wraps each radiator in a frame at the side and in crossbars at the front, which form a grille in front of the radiator. The inner supports brace against the bike's frame and are bolted to it, so the force of an impact goes into the frame. With the full front you remove the factory radiator shrouds. The guards do not restrict steering. RG20 is lighter: it weighs 0.75 kg against 1.31 kg for the RG19.

We bend the guards from AlMg3 aluminium sheet (EN AW-5754, PA11) 4 mm thick and TIG-weld them. After welding we clean and polish them. It is an alloy with about 3% magnesium, the kind boats are built from because it resists corrosion even in salt water. 4 mm sheet is stiff, holds its shape and stands up well to abrasion. The set weighs 1.31 kg.

The kit contains two guards, one for each radiator, and mounting hardware. You bolt the guards to the frame through the inner supports, with no drilling and no changes to the bike.

We design the guards from a 3D scan of the specific bike and cut them on CNC machines in Katowice, Poland. Professional riders test every new model before it goes on sale.