Select Instructions
- RG18 Fan Set TBI - Installation instructions
- RG17 Fan Set TBI - Installation instructions
- Fan Set TBI - Installation instructions
- RG16 - Installation instructions
- Installation instructions PG 05 – PIPE ENGINE DIFFUSER GUARD 2020 MODELS KTM HUSQVARNA 250/300 EXC TE 2T
- Installation instructions RG09 FAN SET – radiator guards with fan for KTM Husqvarna 2020 models
- Installation instructions RG09 i RG09 F – radiator guards KTM Husqvarna 2020
- Installation instructions RG010 FAN SET – radiator guards with fan for KTM Husqvarna 2020 models
- Installation instructions RG10 and RG10 F - KTM Husqvarna 2020 radiator guards
- Relay Installation instructions for KTM and Husqvarna 2020 models
- Relay Installation instructions for KTM and Husqvarna TPI and 4T 2017 and 2018
- Installation instructions ARTAFON PG 02 – KTM HUSQVARNA 2T 2017 2018 PIPE GUARD, skid plate ENGINE DIFFUSER GUARD EXC TE
- Installation instructions ARTAFON RG01 – RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017
- Installation instructions ARTAFON RG02 – RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017
- Installation instructions ARTAFON SP01 – engine guard for KTM/HUSQVARNA 250 300 2T model 2017
- Installation instructions ARTAFON SP02 – engine guard for KTM/HUSQVARNA 250 350 4T model 2017
Installation instructions PG 05 – PIPE ENGINE DIFFUSER GUARD 2020 MODELS KTM HUSQVARNA 250/300 EXC TE 2T
Artafon PG 05 – PIPE DIFFUSER AND ENGINE GUARD 2020 MODELS KTM HUSQVARNA EXC TE 2T TPI 6 fixing points – 2 steel handles at the back, aluminum handle with two screws at the front and two screw fixing to the sockets in the frame. Internal brackets positioning the guard in the correct position relative to the diffuser, frame and engine. Lightweight, tailored to the shape of the diffuser and frame, so as not to accumulate mud and stones. Large drain hole at the lowest point. All double sided welds. Made of reinforced aluminum PA11 / AlMg3 / 4mm thick Fits ONLY with the new (not bent/demaged) OEM diffuser (not FMF DEP etc…) Protects the diffuser, caps, starter and engine. Tested in the most difficult conditions.
KTM HUSQVARNA 2t 4t 2020 MODELS Installation without the cutting of cables and hose. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 models Complete set for two radiators , ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 MODELS Installation without the cutting of cables and hose. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 models Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
The relay is included in the fan sets. The first step is to connect the fan with the installation connector motorcycle (the plug is under the tank), Then put the relay in the socket that is in the airbox.
The relay is included in the fan sets. The first step is to connect the fan with the installation connector motorcycle (the plug is under the tank), Then put the relay in the socket that is in the airbox.
Installation instructions ARTAFON PG 02 – KTM HUSQVARNA 2T 2017 2018 PIPE GUARD, skid plate ENGINE DIFFUSER GUARD EXC TE
Diffuser guard for KTM HUSQVARNA 250/300 EXC TE 2T MODEL 2017, 2018 TPI Protects the pipe, engine, the starter and caps, Ideally suited and tested. Light, tailored to the shape of the diffuser and the frame, so as not to accumulate mud and stones, additionally the drain hole in the lowest point. Internal brackets position and maintain the cover in correct position. Includes screws and washers. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Fits with OEM diffuser. Matched, tested.
RG01 - RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017 COMPATIBLE also with SPAL and Trail Tech FAN (Set not fan included) Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
RG02 - RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017 For models without fan. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
SP01 - skid plate for KTM/HUSQVARNA(SP01H) 250 300 2T model 2017 Protects the engine, the starter and caps, Ideally suited and tested. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Includes screws and washers.
SP02 - skid plate for KTM/HUSQVARNA(SP02H) 250 350 4T model 2017 Protects the engine, the starter and caps, Ideally suited and tested. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Includes screws and washers.
